18931 | Cutter head for Constanta | x | |
| 18945 | screwdriver | x |
| 18946 | Torx-screw driver TX20 for | x |
| CO412 | bearing 627 2Z., for | x |
| CO600 | Plastic case incl. insert | x |
| CO601 | reduction gearing 11/32 teeth | x |
| CO605 | carbon brush holder, right and | x |
| CO607 | O-ring for ball bearing from | x |
| CO610 | motor protection switch 400W | x |
| CO612 | cable for Constanta3+4 | x |
| CO614 | screw 4x12 for transmission | x |
| CO615 | screws for case 4x20 for | x |
| CO616 | Carrying loop | x |
| CO618 | Switch with Capacitor, | x |
| CO618-E | switch w.condenser,cable (GB) | x |
| CO622 | gear wheel 32 teeth for gear | x |
| CO624 | rotor and stator w.housing | x |
| CO630 | crankcase two-piece f. Consta4 | x |
| CO640 | crank case two-piece for | x |
| CR618 | screw for headfixing of | x |
| CR620 | driving motor complete 400W | x |
| CR621-G | Air filter right | x |
| CR622-G | air filter left for Constanta4 | x |
| CR623 | carbon brush with spring for | x |
| CR624 | socket big 12X13,5 for | x |
| CR625 | socket small 6x10 for | x |
| CS608 | excentric roll for Constanta3+ | x |
| CS611 | pressing rod f. Constanta3+4 | x |
| CS612 | thrust bushing for pressing | x |
| CS616 | sperical socket f. Constanta3+ | x |
| CS619 | screw for buttom blade for | x |
| CS622 | allen screw M4x20mm for | x |
| CS627 | retaining spring | x |
| CS628 | adjusting nut set for | x |
| CS630 | Clipper head housing top part | x |
| CS631 | Housing bottom incl. socket | x |
| CS632 | lever set with locking spring | x |
| CS633 | clamping claw right side for | x |
| CS634 | clamping claw left side for | x |
| CS635 | Excenter for | x |
| CS636 | swivel strap cover | x |
| CS637 | cutter stop | x |
| CS638 | spur gear with shaft for | x |
| CO300 | bearing 608-2t f. Constanta | x |
1850488 | Oil for clipping machines | x | |
| CO619 | Switch only for Constanta4 | x |
| CO623 | Switch with Capacitor, | x |
| CO623-E | Switch with Capacitor, | x |