Heat detection paint Daisy Paint

water-based marking paint for efficient and cost-effective heat detection of cows
increases insemination success, reduces the number of non-bearing animals and lowers reproduction costs
the colour applied to the base of the tail is rubbed off by mutual mounting and makes animals in heat easily recognisable
using a colour scheme, the animals can be identified differently depending on the cycle
contains bitter substance
significantly better visibility than with conventional marking pens and sprays
available in four bright colours: red, blue, green and orange
easy application of the colour using the optionally available tailpainter applicator

Ref. no.	Colour	Contents	PU
20704	red	750 ml / Bottle	1/12	1/12
20705	blue	750 ml / Bottle	1/12	1/12
20706	green	750 ml / Bottle	1/12	1/12
20707	orange	750 ml / Bottle	1/12	1/12
20708	red	2,5 L / Canister	1	1
20709	blue	2,5 L / Canister	1	1
20710	green	2,5 L / Canister	1	1
20711	orange	2,5 L / Canister	1	1
20712	red	5 L / Canister	1	1
20713	blue	5 L / Canister	1	1
20714	green	5 L / Canister	1	1
20715	orange	5 L / Canister	1	1

Recommendations for use:

Six weeks before you start inseminating, mark the whole herd with the 1st colour (red).
Worn-off dye indicates that the animal is in heat. Animals in heat are marked until the start of insemination with the second colour (blue).
Inseminations can begin after six weeks. Animals still marked in red that do not have a cycle should be examined by a vet and treated if necessary.
All inseminated animals are marked with the third colour (green).
Animals that are inseminated repeatedly are marked with the 4th colour (orange).

Further information