Animal Clipper constanta4

the tried-and-tested motor technology gives the constanta4 tremendous tractive power
even on matted and dirt-encrusted animals the constanta4 does not "yield"
the blades glide through the most difficult of coats without loss of power

other properties

2-year warranty

Ref. no.	Colour	Teeth lower/upper blade	Shearing type	PU	Pallet
18990	green	21 / 23	Cattle Shearing, Horse Shearing	1/8	48 PAL

Technical data	Voltage	Mains frequency	Power	Clipper head system	Stroke rate	Sound pressure level	Cable length	Dimensions	Weight	Protection class
18990	230 V AC	50 Hz - 60 Hz	400 W	Shearing Blade Set	approx. 2400 strokes/min	87 dB (A)	3 m	33 cm x 7,8 cm x 9,7 cm	1490 gwithout cable	II

Included in delivery:

1 x animal clippers constanta4

1 x shearing blade set

1 x oil

1 x screwdriver

1 x instruction manual

1 x Durable plastic case

Instruction manual

Item. No.	Description	18990
18930	Clipping head without blade f.	x
1850488	Oil for clipping machines	x
18945	screwdriver	x
18946	Torx-screw driver TX20 for	x
CO412	bearing 627 2Z., for	x
CO600	case for Constanta3+4	x
CO601	reduction gearing 11/32 teeth	x
CO605	carbon brush holder, right and	x
CO607	O-ring for ball bearing from	x
CO608	mains connection cable with	x
CO610	motor protection switch 400W	x
CO612	cable for Constanta3+4	x
CO614	screw 4x12 for transmission	x
CO615	screws for case 4x20 for	x
CO616	carryingstring f. Constanta3+4	x
CO618	Switch with Capacitor,	x
CO618-E	switch w.condenser,cable (GB)	x
CO624	rotor and stator w.housing	x
CO630	crankcase two-piece f. Consta4	x
CO640	crank case two-piece for	x
CR603	screw for lower blade	x
CR604	oscillator alone for	x
CR605	headless screw for oscillator	x
CR606	spring plate for Constanta3+4	x
CR607	spreader plate for oscillating	x
CR608	spur gear (26 teeth) w shaft	x
CR609	eccentricsquare oscillating-	x
CR610	case with plug socket for the	x
CR611	countersink screw for shaft	x
CR613	adjusting screw with stopper	x
CR615	screw for springbritch	x
CR616	springbritch for Constnata3+4	x
CR617	screw for oscillator back for	x
CR618	screw for headfixing of	x
CR620	driving motor complete 400W	x
CR621-G	air filter right f. Constanta4	x
CR622-G	air filter left for Constanta4	x
CR623	carbon brush with spring for	x
CR624	socket big 12X13,5 for	x
CR625	socket small 6x10 for	x
CR626	sleeve 14x18 for Constanta3+4	x
CR627	replacement kit adjusting	x
CO300	bearing 608-2t f. Constanta	x
CO619	Switch only for Constanta4	x
CO623	Switch with Capacitor,	x
CO623-E	Switch with Capacitor,	x